Quality : Speed : Openness
Visit the Research & Politics website for full information.
Follow Research & Politics developments via Twitter at www.twitter.com/Res_Pol
Research & Politics is now accepting submissions. Log on to the SAGE Track site here: http://mc.manuscriptcentral.com/rap.
Research & Politics aims to advance systematic peer-reviewed research in political science and related fields through the publication of the very best cutting-edge research and policy analysis. The journal provides a venue for scholars to communicate rapidly and succinctly important new insights to the broadest possible audience while maintaining the highest standards of quality control.
To meet this goal Research & Politics publishes short, accessible articles that present novel findings or insights, or fresh views on current disputes or classic papers. The Journal is published online only and uses an open access model to enhance readership and impact. Articles are published simultaneously with technical research reports and appendices, with an emphasis on the highest standards of research ethics and, where applicable, replicability.
Papers are accepted from political science, public policy, public administration, international relations and other related fields.
Research & Politics is a recipient of a grant from Carnegie Corporation of New York under its “Bridging the Gap” initiative. The grant sponsors open access APCs for all authors for a period of two years (2016 and 2017), and therefore the current APC waiver policy continues for all accepted articles in Research & Politics during this timeframe. For more see: http://studysites.uk.sagepub.com/researchandpolitics/default.htm#open
Please direct any inquiries to email@example.com.
This journal is a member of the Committee on Publication Ethics (COPE).
Visit the Research & Politics website for full information.
Research & Politics aims to advance systematic peer-reviewed research in political science and related fields through the open access publication of the very best cutting-edge research and policy analysis. The journal provides a venue for scholars to communicate rapidly and succinctly important new insights to the broadest possible audience while maintaining the highest standards of quality control.
Research & Politics is characterised by:
Quality – papers undergo rigorous external peer review with an extensive role for a highly-experienced group of Associate Editors. Research & Politics is selective and the editors will reject papers that are sound but which do not meet the highest standards. Research & Politics’ citation activity will be closely monitored and it will be prepared for submission to the Social Science Citation Index as soon as possible.
Brevity – research articles of up to 4,500 words and research notes of up to 2,000 words will focus on the key research findings.
Openness – no paywalls, so content is freely accessible online to all on the award-winning SAGE Journals platform and compatible with all existing open access mandates.
Speed – rapid decision-making and a online-only continuous publication model ensure that research can be shared quickly.
Transparency – emphasis on the provision of research data and methodology, as well as metrics to demonstrate the research impact of papers.
Innovation - priority is given to research that breaks new ground, is important across a wide range of subfields, and will likely influence political science in a distinctive fashion. In addition to research articles this advancement of knowledge can take the form of null-findings, forecasts, updates of seminal articles, critiques/replications or exploratory research.
Presentation – papers are copyedited and typeset to highest standards; online-only publication offers additional presentational possibilities including colour graphs and simulations.
|James H. Fowler||University of California San Diego, USA|
|Diana Kapiszewski||Georgetown University, USA|
|Thomas König||University of Mannheim, Germany|
|Carles Boix||Princeton University, USA|
|David Darmofal||University of South Carolina, USA|
|Bas Denters||University of Twente, Netherlands|
|Radoslaw Zubek||University of Oxford, UK|
|Antoaneta Dimitrova||Leiden University, Netherlands|
|Keith Dowding||Australian National University, Australia|
|Mary Gallagher||University of Michigan, USA|
|Venelin Ganev||Miami University, USA|
|Frank Haege||University of Limerick, Ireland|
|Liesbet Hooghe||University of North Carolina, USA|
|Daniel Hopkins||University of Pennsylvania, USA|
|Matther Kerby||University of Ottawa, Canada|
|Thomas König||University of Mannheim, Germany|
|Gary Marks||University of North Carolina, USA|
|Frank Schimmelfennig||ETH Zurich, Switzerland|
|Ulrich Sedelmeier||London School of Economics, UK|
|John Sides||George Washington University, USA|
|Tereza Capelos||University of Birmingham, UK|
|Elias Dinas||University of Oxford, UK|
|Andrew Eggers||University of Oxford, UK|
|Lawrence Ezrow||University of Essex, UK|
|Sara Binzer Hobolt||London School of Economics, UK|
|Jeffrey Karp||University of Exeter, UK|
|Mark Kayser||Hertie School of Governance, Germany|
|Yanna Krupnikov||Stony Brook University, USA|
|Alex Mintz||IDC Herzliya, Israel|
|Michel Regenwetter||University of Illinois, USA|
|John Ryan||Stony Brook University, USA|
|Marco Steenbergen||University of Zurich, Switzerland|
|Christopher Wlezien||University of Texas at Austin, USA|
|Josep Colomer||Georgetown University, USA|
|Henry Farrell||George Washington University, USA|
|Sona Golder||Pennsylvania State University, USA|
|Philip Habel||University of Glasgow, UK|
|Indridi Indridason||University of California, USA|
|James Johnson||University of Rochester, USA|
|Anthony McGann||University of Strathclyde, UK|
|Erica Chenoweth||University of Denver, USA|
|Anjali Dayal||Fordham University, USA|
|Antoaneta Dimitrova||Leiden University, Netherlands|
|Han Dorussen||University of Essex, UK|
|M. Taylor Fravel||Massachusetts Institute of Technology, USA|
|Jennifer Gandhi||Emory University, USA|
|Kristian Skrede Gleditsch||University of Essex, UK|
|Havard Hegre||Uppsala University, Sweden|
|Michael Horowitz||University of Pennsylvania, USA|
|Paul Huth||University of Maryland, USA|
|Susan Hyde||University of California, Berkeley, USA|
|Sarah Kreps||Cornell University, USA|
|Matther Kroenig||Georgetown University, USA|
|Bahar Leventoglu||Duke University, USA|
|Marc Lynch||George Washington University, USA|
|Sara Mitchell||Political Science, University of Iowa, USA|
|Will H. Moore||Florida State University, USA|
|Amanda Murdie||University of Missouri, USA|
|Jeremy Pressman||University of Connecticut, USA|
|Wayne Sandholtz||University of South Carolina, USA|
|Gerald Schneider||University of Konstanz, Germany|
|Barbara Walter||University of California San Diego, USA|
|Nils Weidmann||Political Science, University of Konstanz, Germany|
|Simon Bastow||London School of Economics, UK|
|Jan Beyers||University of Antwerp, Belgium|
|Arjen Boin||Utrecht University, Netherlands|
|Thomas Braeuninger||University of Mannheim, Germany|
|Michael Herron||Dartmouth College, USA|
|David Lowery||Pennsylvania State University, USA|
|René Torenvlied||University of Twente, Netherlands|
|Dimiter Toshkov||Leiden University, Netherlands|
|Angelia Wilson||University of Manchester, UK|
|Radoslaw Zubek||University of Oxford, UK|
|Cliff Carruba||Emory University, USA|
|Tom Clark||Emory University, USA|
|Kirk Randazzo||University of South Carolina, USA|
|Branislav Slantchev||University of California-San Diego, USA|
|Anthony Smith||University of California Irvine, USA|
|Marco Steenbergen||University of Zurich, Switzerland|
|Georg Vanberg||Duke University, USA|
|Patrick Dunleavy||London School of Economics & Political Science, UK|
|Scott Gates||Political Science, University of Oslo & PRIO, Norway|
|Adrienne Héritier||European University Institute, Italy|
|Gary King||Harvard University, Cambridge, USA|
|Michael Laver||New York University, USA|
|Helen Milner||Princeton University, USA|
|Andrew Moravcsik||Princeton University, USA|
|Wolfgang Müller||University of Vienna, Austria|
|Mathias Risse||Harvard University, USA|
|Rein Taagepera||University of Tartu, Estonia|
|Jacques Thomassen||University of Twente, Netherlands|
- Open Access
- Article processing charge (APC)
- Article Types
- Editorial policies
4.1 Peer Review Policy
4.5 Declaration of conflicting interests
- Publishing policies
5.1 Publication ethics
5.2 Contributor's publishing agreement
5.3 Transparency, Openness and Replication Policy
- Preparing your manuscript
6.1 Word processing formats
6.2 Artwork, figures and other graphics
6.3 Supplementary material
6.4 Reference style
6.5 English language editing services
- Submitting your manuscript
7.2 Information required for completing your submission
7.3 Corresponding author contact details
- On acceptance and publication
8.1 SAGE Production
8.2 Continuous publication
8.3 Promoting your article
- Further information
This Journal is a member of the Committee on Publication Ethics
Please read the guidelines below then visit the journal’s submission site https://mc.manuscriptcentral.com/rap to upload your manuscript. Please note that manuscripts not conforming to these guidelines may be returned.
Only manuscripts of sufficient quality that meet the aims and scope of Research & Politics will be reviewed.
As part of the submission process you will be required to warrant that you are submitting original work, that you have the rights to the work, that you are submitting the work for first publication in the Journal and that it is not being considered for publication elsewhere and has not already been published elsewhere, and that you have obtained and can supply all necessary permissions for the reproduction of any copyright works not owned by you.
Research & Politics is an open access, peer-reviewed journal. Each article accepted by peer review is made freely available online immediately upon publication, is published under a Creative Commons license and will be hosted online in perpetuity. Publication costs of the journal are covered by the collection of article processing charges which are paid by the funder, institution or author of each manuscript upon acceptance. There is no charge for submitting a paper to the journal.
Research & Politics is a fully open access journal available to anyone with an internet connection.
The Carnegie Corporation of New York grant has sponsored open access APCS for R&P authors since 2016. Any articles published prior to June 2018 will benefit from the current APC waiver as a result of this sponsorship. In future an APC will be set at a level appropriate to the discipline, with an approriate waiver and discoutn policy available for those authors who do not have the means to cover the APC. The journal editors will aim to inform authors at an early stage when an APC will be introduced and for those papers under review, editors will provide a reasonable timeline for completing the reviewing process.
Research & Politics strongly encourages replication studies for publication and distinguishes between two submission formats: research articles and research notes. In addition to the research articles published on the website, Research & Politics will be publishing special issues.
The journal encourages short articles. Articles should normally not exceed 4,000 words including notes and references but excluding figures, tables and images or any supporting material that will appear as supplemental online appendices. The number of notes should not exceed 12. The main criterion for evaluating articles is that they contribute to our systematic knowledge about important substantive, theoretical, or methodological questions. Research articles can be - but are not limited to - articles that:
- Offer new theoretical or normative arguments in a systematic way;
- Analyze original data;
- Re-analyze existing data in a novel fashion;
- Analyze systematically current events;
- Make predictions in politics;
- Update seminal articles with new data;
- Discuss newly collected data and how these can be used to advance our knowledge about important substantive or theoretical questions.
These should focus on a controversy in the literature, present a new empirical finding, or discuss the policy implications of recently gained insight. These notes have a limit of 2,000 words including notes and references but excluding figures, tables and images or any supporting material that will appear as supplemental online appendices. The number of notes should not exceed 8. Research Notes may also respond to or replicate existing research. These may include reports on null-results for cases where previously non-trivial statistical relationships were claimed.
In case of replication studies, Research & Politics invites authors to consider submitting a paper that is along the lines of one or more of the following replication types:
Theoretical replication: The submitted article argues that the original theoretical model is missing at least one key element. The missing element(s) are addressed and included in the empirical analysis.
Technical replication: The submitted article identifies faults in the original research design or analysis, thereby arguing that the original results might not hold; and/or
Concept replication: The submitted article questions the validity of the original study. An alternative measurement or operationalisation is proposed which yields different substantive results.
Once a replication study has been accepted to begin the review process, two reviewers will be selected and the author of the original manuscript will be notified. The author of the original study will be approached for a rejoinder, which will be reviewed (preferably a shorter paper of 2,000 words max). The General Editor will review the response and will decide if the response will be published alongside the submitted replication study.
Research & Politics allows authors to register their studies, but this is not an obligation. Registration might also be relevant for cases in which existing studies are re-analyzed (ideally by collecting new data, or re-analyzing existing datasets following closely the format of the original study), particularly of research published in this journal. When possible, such studies are reviewed in two stages following the Registered Reports format. In particular, the first stage of review is conducted prior to the data being collected or, for existing datasets, before the outcomes are observed:
- On initial submission, authors should:
- denote in the cover letter that the manuscript is a Registered Report submission and confirm that the data do not exist, or that the outcomes have not been observed.
- include a full manuscript for the abstract, introduction, and methods without the results and discussion sections.
- disclose that the methods contain a complete analysis plan of what is to be included in the full article.
- If the submission passes initial review, then the authors will receive an in-principle acceptance prior to data collection or analysis of the outcomes.
- For the second stage of review, authors submit a complete manuscript. Reviewers assess the extent to which the authors followed the preregistered design and/or analysis plan, and evaluate non-outcome relevant criteria (e.g., manipulation checks) to confirm whether the research was an effective test of the research question.
Research & Politics may publish special issues. In the format of this journal,, a special issue is a bundle of closely related research papers on a specific topic. When published, these articles will be linked on our website.
To initiate a special issue proposal, a lead-autor may submit a proposal to the Editors. This must discuss at least the following elements:
1. Description of the main topic and focus of the special issues;
2. A motivation for why a special issue would be relevant to our readers, and to what extent the special issue will promote novel findings and new insights. There should also be a brief motivation for why a special issue would be a better way of presenting these findings and insights needs to be included
3. List of papers to be included with full author infomation, including their affiliation;
4. Indication of when papers will be ready to be submitted;
5. Indicate a scholar who is willing to serve as the Associate Editor for this special issue.
After acceptance, the Editors select an Editor and Associate Editor who will guide the special issue. The same procedures and guidelines apply as for research articles for the review process or any other issues arising.
Rejoinders and comments
1. Comments on an article published in R&P or elsewhere
If there is a paper reacting to an article published in R&P or elsewhere, the author(s) of the original article is/are invited to consider a comment. The author(s) will be informed the moment the reacting paper is received. However, the author will not be a formal reviewer or directly determine the decision whether to publish.
If the author(s) of the original paper decide(s) to submit a response, this is also reviewed as it needs to meet scientific standards and contain sufficiently interesting material to merit publication. Upon publication of a respose, the discussion is closed. Any further discussion must be done elsewhere.
2. Secondary or replication work on previous research
In the case of secondary or replication work on previous research, the submitted article will be regarded as an original contribution (Article). Unless it is explicitly addresses the methodological issues with the original paper and replication, the work will be treated as a new submission. If the replication concerns a specific paper, the authors of the work discussed are informed and invited to comment (see our policy under point 1).
If the article concerns a specific literature, scholars in that field are not informed. In that case we will follow the following procedure:
i. When a comment from the author(sP whose work is being discussed is received, the comment is reviewed and send to the authors of the original contribution with the invitation to respond.
ii. This comment (Comment 1) may be published after reviewing. If the author of the original contribution would like to respond, we review this Comment 2. The commenting author as well as the authors of the original article can comment during reviewing but they are not included in a decision about the paper. When published the discussion will be closed.
iii. Furhter discussion can be done elsewhere. Only Article, Comment 1 and Comment 2 are published.
IMPORTANT: Comments must be scholarly, understandable to outsiders, and of sufficient general interest to merit publication. Research & Politics reserves the right to make editorial suggestions and reject if we cannot reach agreement.
Research & Politics operates a high-quality, quick, double-blind peer review process in which the reviewer's name is withheld from the author and the author's name from the reviewer. All submissions to Research & Politics are double-blind peer reviewed. Papers submitted by Associate Editors are submitted to double-blind peer review.
Each paper is sent out to at least one external reviewer, but in comparison to most existing political science journals, the evaluative process is more heavily concentrated in the hands of the editorial team. The peer review process is as follows:
- Vetting by the Editorial Office to ensure that the article conforms to the Research & Politics guidelines on length and style. This vetting process includes processing of papers using plagiarism software.
- Review by a General Editor who will take a decision on whether to send it out for eternal review. If an article is deemed of insufficient quality or novelty it can be rejected by the General Editor in conjunction with an Associate Editor at this stage. The author will be informed of this decision with a brief note spelling out the reason for rejection. If the manuscript passes this stage, it will be reviewed.
- The General Editor delegates the decision-making authority to an Associate Editor. Two external reviewers will be selected by the Associate Editor and the General Editor will make the final decision.
- Reviewers are expected to respond in 30 days. Referee reports are typically 2 pages (or 500 words maximum). If the reviewer is unable to complete a review the journal applies the following policy:
- If a reviewer indicates that she/he is unable to submit a report in the first or second week of this process, a new reviewer will be selected;
- If a reviewer appears to be unable to submit a report after some time, the General Editor may decide that the Associate should provide his/her view on the manuscript in a brief report, which is submitted to the General Editor.
A manuscript may be rejected on the basis of one negative review, especially if this review comes from one of the Associate Editors.
In exceptional cases, a manuscript may be assigned a ‘revise and resubmit’. Such a decision will only be offered if there is a reasonable expectation that the author can meet the expectations set out in a letter with meaningful guidelines for improving the initial submission. Typically, a revised manuscript will only be reviewed by the Associate Editor or one of the referees.
The editors will also continually assess the quality levels of the refereeing procedure and annually review the Associate Editors team to ensure that its range of expertise is aligned with submission and research trends.
Our goal is to publish papers online within 25 working days of acceptance where possible.
Previous Reviewer Comments
Research & Politics permits authors whose papers are not accepted by one journal and who wish to submit their manuscripts to Research & Politics to request that the previous set of reviews be forwarded by the other journal. In such case[s], Research & Politics requires all reviews from the other journal. Authors should request that the editors of the other journal submit all reviews, subject to the original reviewers giving permission for their review to be shared with another journal. Without prior consent, reviews will not be used. The reviews and confirmation of reviewer permissions should be sent to the Research & Politics editorial office (mail: firstname.lastname@example.org) by the other journal. Research & Politics will not accept peer reports directly submitted by the author. Research & Politics is committed to ensuring that the identity of the original reviewers and the author are not revealed to either party, upholding double blind peer review. The editors or associate editors of Research & Politics will also commission additional peer review reports before making a decision, as indicated by our policy. The main advantages of this option are to reduce the workload on reviewers and to potentially speed up publication time.
As part of the submission process you will be asked to provide the names of X peers who could be called upon to review your manuscript. Recommended reviewers should be experts in their fields and should be able to provide an objective assessment of the manuscript. Please be aware of any conflicts of interest when recommending reviewers. Examples of conflicts of interest include (but are not limited to) the below:
- The reviewer should have no prior knowledge of your submission
- The reviewer should not have recently collaborated with any of the authors
- Reviewer nominees from the same institution as any of the authors are not permitted
Please note that the Editors are not obliged to invite any recommended/opposed reviewers to assess your manuscript.
All parties who have made a substantive contribution to the article should be listed as authors. Principal authorship, authorship order, and other publication credits should be based on the relative scientific or professional contributions of the individuals involved, regardless of their status. A student is usually listed as principal author on any multiple-authored publication that substantially derives from the student’s dissertation or thesis.
All contributors who do not meet the criteria for authorship should be listed in an Acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, or a department chair who provided only general support.
4.3.1 Writing assistance
Individuals who provided writing assistance, e.g. from a specialist communications company, do not qualify as authors and so should be included in the Acknowledgements section. Authors must disclose any writing assistance – including the individual’s name, company and level of input – and identify the entity that paid for this assistance”).
It is not necessary to disclose use of language polishing services.
Please supply any personal acknowledgements separately to the main text to facilitate anonymous peer review.
Research & Politics requires all authors to acknowledge their funding in a consistent fashion under a separate heading. Please visit the Funding Acknowledgements page on the SAGE Journal Author Gateway to confirm the format of the acknowledgment text in the event of funding, or state that: This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
Authors are required to state whether their contribution is based on independent research or not. Within your Journal Contributor’s Publishing Agreement, you will be required to make a certification with respect to a declaration of conflicting interests. Research & Politics additionally requires a declaration of conflicting interests to be included in the acknowledgements footnote. Good practice guidelines together with details of how to make a declaration of conflicting interest can be found on the SAGE Journal Author Gateway.
Each author should disclose any paid or unpaid positions as officer, director, or board member of relevant non-profit organizations or profit-making entities. A ‘relevant’ organization is one whose policy positions, goals, or financial interests relate to the article.
If the research on which the contribution is based has been funded by others, either fully or partially, or has been made possible through the provision of resources without which the research could not have been done, the names of these organizations need to be stated in an Acknowledgement in a manner consistent with the Guidance for Research Funders, Authors and Publishers issued by the Research Information Network (RIN). Please visit Funding Acknowledgements on the SAGE Journal Author Gateway to confirm the format of the acknowledgment text. In the event that no funding has been received please state in your acknowledgements that: ‘This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.’
For information on publication ethics we encourage our authors to refer to the Committee on Publication Ethics (COPE) website.
SAGE is committed to upholding the integrity of the academic record. We encourage authors to refer to the Committee on Publication Ethics’ International Standards for Authors and view the Publication Ethics page on the SAGE Author Gateway.
Research & Politics and SAGE take issues of copyright infringement, plagiarism or other breaches of best practice in publication very seriously. We seek to protect the rights of our authors and we always investigate claims of plagiarism or misuse of published articles. Equally, we seek to protect the reputation of the journal against malpractice. Submitted articles may be checked with duplication-checking software. Where an article, for example, is found to have plagiarized other work or included third-party copyright material without permission or with insufficient acknowledgement, or where the authorship of the article is contested, we reserve the right to take action including, but not limited to: publishing an erratum or corrigendum (correction); retracting the article; taking up the matter with the head of department or dean of the author's institution and/or relevant academic bodies or societies; or taking appropriate legal action.
5.1.2 Prior publication
If material has been previously published, it is not generally acceptable for publication in a SAGE journal. However, there are certain circumstances where previously published material can be considered for publication. Please refer to the guidance on the SAGE Author Gateway or if in doubt, contact the Editor at the address given below.
Before publication SAGE requires the author as the rights holder to sign a Journal Contributor’s Publishing Agreement. Research & Politics publishes manuscripts under Creative Commons licenses. The standard license for the journal is Creative Commons by Attribution Non-Commercial (CC BY-NC), which allows others to re-use the work without permission as long as the work is properly referenced and the use is non-commercial. For more information, you are advised to visit SAGE's OA licenses page
Alternative license arrangements are available, for example, to meet particular funder mandates, made at the author’s request.
Research & Politics complies with the Data Access and Research Transparency (DA-RT) statement and TOP Guidelines and, as such, endorses policies requiring authors to make as accessible as possible the empirical foundation and logic of inquiry of evidence-based research. Contributions based on qualitative and quantitative data must be well documented and, if data is collected by the author, well described.
Research & Politics requires authors to delineate clearly the design and analytic procedures upon which their published claims rely. Authors have to identify and disclose the types and key aspects of the research design to every extent possible. Please see the Publication Types Policy for the different types of replication studies. The information will be sent to reviewers, revised alongside the paper in every round and published alongside the paper (as appendix or online supplement).If such materials are not published with the article, they must be shared to the greatest extent possible through a digital repository.
Authors have to use data citation practices that identify a dataset’s author(s), title, date, version, and a persistent identifier ,for example a Digital Object identifier (DOI). In sum, we will require authors who base their claims on data created by others to reference and cite those data as an intellectual product of value.
It is Research & Politics' policy that authors submit detailed information on empirical analysis alongside their written article. Authors should upload at least the first four files listed below when they submit their article.
- data set
- syntax file(s) from the software that has been used for the analysis;
- explanatory memo: explaining enclosed files/material and their content including help with regard to the analysis, which is important when non-standard techniques have been used; this may also apply to qualitative work; also some information on the software used for the analysis, including its version, is required;
- log file(s): output with results from the software that has been used for the analysis;
- Additional data analysis, including robustness analyses
Authors must provide a separate readme PDF listing all included files and documenting the purpose and format of each file provided, as well as instructing a user on how the replication can be conducted.
Making datasets publicly available is also a policy of Research & Politics. Authors should ensure that data is available at the time of publication through a recognised third party data repository and will be prompted to upload their data to Dataverse on acceptance of their article. The manuscript will not be moved through to Production until data is uploaded to a third party data repository and the link has been provided as instructed on acceptance. If cited data is restricted (e.g. classified, require confidentiality protections, were obtained under a non-disclosure agreement, or have inherent logistical constraints), authors must notify the editor at the time of submission. The editor shall have full discretion to follow their journal’s policy on restricted data, including declining to review the manuscript of granting an exemption with or without conditions. The editor shall inform the author of this decision prior to review.
It is the responsibility of the author to make their data available via third party repository. It is preferred that data is uploaded to the Research & Politics Dataverse site, but other trusted digital repositories can be found below:
*Note that there is a charge for using this service.
Research & Politics also requires authors to delineate clearly the analytic procedures upon which their published claims rely, and where possible provide access to all relevant analytic materials. If such materials are not published with the article, they must be shared to the greatest extent possible through a digital repository (above).
Research & Politics encourages authors to use data citation practices that identify a dataset’s author(s), title, date, version, and a persistent identifier. In sum, we will require authors who base their claims on data created by others to reference and cite those data as an intellectual product of value.
Researchers conducting experimental studies are encouraged to consider pre-registering their research design in advance with an established registry, for example egap (Evidence in Governance and Politics, see http://egap.org/content/registration).
Preregistration of Studies and Analysis Plans
Research & Politics also publishes papers where authors indicate the conducted research was preregistered with an analysis plan in an independent, institutional registry (e.g., http://clinicaltrials.gov/,https://socialscienceregistry.org/,http://openscienceframework.org/, http://egap.org/design-registration/, http://ridie.3ieimpact.org/). Preregistration of studies involves registering the study design, variables, and treatment conditions. Including an analysis plan involves specification of sequence of analyses or the statistical model that will be reported.
For preregistered studies, the following requirements apply:
- Authors must, in acknowledgments or the first footnote, indicate that research was preregistered in an independent, institutional registry (with name and link to its location) with an analysis plan;
- The author must:
- confirm in the text that the study was registered prior to conducting the research with links to the time-stamped preregistration(s) at the institutional registry, and that the preregistration adheres to the disclosure requirements of the institutional registry or those required for the preregistered badge with analysis plans maintained by the Center for Open Science.
- report all pre-registered analyses in the text, or, if there were changes in the analysis plan following preregistration, those changes must be disclosed with explanation for the changes clearly distinguish in text analyses that were preregistered from those that were not, such as having separate sections in the results for confirmatory and exploratory analyses (these changes are added as a separate document linked to the text of the main paper).
(i) Title page. The author must attach a separate file containing full title and subtitle (if any). Keep the title concise and informative. The title page must also include the corresponding author’s full contact information (including email address, mailing address, telephone number and institutional affiliation, as well as the names and institutional affiliations of all co-authors). Where appropriate, authors should also list their Twitter handles which will be used for the promotion of the paper if accepted. Where the author selects single blind reviewing, this page will be added to the main text of the article or note; where the author selects double blind peer review it will be left out.
(ii) Abstract. Up to 200 words; should briefly specify (a) the purpose of the paper, (b) the approach/design/methodology used, (c) the main findings of the paper; (d) the implications of these findings, including possible limitations. The abstract is not included in the article word limit.
(iii) Keywords: A list of up to 6. Avoid general or plural terms; use only those abbreviations that are firmly established in political science.
(iv) Main text. Word count should not exceed 4,000 words (Research Article) or 2,000 words (Research Note) including notes and references but excluding figures, tables, images and any supporting material that will appear as supplementary appendices (see below). Text should be clearly organized, with a clear hierarchy of headings and subheadings and quotations exceeding 40 words displayed, indented, in the text. Tables and Figures should be included in the main text. If placing the figures in the appropriate place is not possible for some reason, the author should explain why under 'Details & Comments' in the ScholarOne™ Manuscripts online system. All figures and tables should be clearly captioned and references in the text.
End notes should be signalled by superscript number in the main text and listed at the end of the text before the references. The number of notes should not exceed 12 (Research Article) or 8 (Research Note). The number of references should not exceed 40 (Research Article) or 25 (Research Note).
The text should be double-spaced throughout and with a minimum of 3cm for left and right hand margins and 5cm at head and foot. Text should be standard 10 or 12 point. Endnotes and references may be single-spaced using the same font size as that used in the body of the manuscript.
All contributors who do not meet the criteria for authorship should be listed in an Acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, writing assistance, or a department chair who provided only general support. Authors should disclose whether they had any writing assistance and identify the entity that paid for this assistance. Acknowledgements, the Funding Statement and any Declaration of Conflicting Interest should appear at the end of your article prior to any notes and your references.
(v) Data and Replication Information Meta-Document. Authors must provide a separate readme PDF listing all included files and documenting the purpose and format of each file provided, as well as instructing a user on how the replication can be conducted.
(vi) Institutional or Human Subjects Review Board Approval (if applicable). This should be submitted as a separate document and will not count towards the article word limit. It will be reviewed by the General Editor and Associate Editor but not sent out for external review.
(vi) Supplementary files (where appropriate). Research & Politics is able to host supplemental files online alongside the full-text of articles. The supplementary files should be submitted as separate files to make sure the words are not counted as part of the main document.
Where provided, supplemental files will be subjected to peer-review alongside the article and must be formatted in the same way as the article; accompanying text should not exceed 500 words except under exceptional circumstances and with the approval of the editors. This text is not included in the article word limit. Supplementary files should be uploaded in the “Data Upload” submission step.
Types of appendices accepted include:
- Mathematical proofs;
- Simulation code;
- Description of an experiment used;
- Details on the research design, including a discussion of alternatives or previously used designs
- Audio/video files
- Tables and figures
A variety of file types are accepted for graphics, audio and video.
SAGE also support video abstracts (Vidabs), short video introductions to articles which can be linked to from the Table of Contents pages. Please see the video abstract guidelines for more information.
The preferred format for your manuscript is Word. LaTeX files are also accepted. Word and (La)Tex templates are available on the Manuscript Submission Guidelines page of our Author Gateway.
For guidance on the preparation of illustrations, pictures and graphs in electronic format, please visit SAGE’s Manuscript Submission Guidelines
Figures supplied in color will appear in color online.
This journal is able to host additional materials online (e.g. datasets, podcasts, videos, images etc) alongside the full-text of the article. For more information please refer to our guidelines on submitting supplementary files
Research & Politics adheres to the SAGE Harvard reference style. Please review the guidelines on SAGE Harvard to ensure your manuscript conforms to this reference style.
When the scientific content of the submission is worthy of consideration for acceptance in Research & Politics, but the submission's usage of the English language is not sufficient, the author can be advised to seek help from a native speaker or consider another way to check their paper on English. Authors seeking assistance with English language editing, translation, or figure and manuscript formatting to fit the journal’s specifications should consider using SAGE Language Services. This is a payable English language editing service that is suggested but not obligatory to submission.
Visit SAGE Language Services on our Journal Author Gateway for further information.
Research & Politics is hosted on SAGE Track, a web based online submission and peer review system powered by ScholarOne™ Manuscripts. Visit http://mc.manuscriptcentral.com/rap to login and submit your article online.
IMPORTANT: Please check whether you already have an account in the system before trying to create a new one. If you have reviewed or authored for the journal in the past year it is likely that you will have had an account created. For further guidance on submitting your manuscript online please visit ScholarOne Online Help.
As part of our commitment to ensuring an ethical, transparent and fair peer review process SAGE is a supporting member of ORCID, the Open Researcher and Contributor ID. ORCID provides a persistent digital identifier that distinguishes researchers from every other researcher and, through integration in key research workflows such as manuscript and grant submission, supports automated linkages between researchers and their professional activities ensuring that their work is recognised.
We encourage all authors to add their ORCIDs to their SAGE Track accounts and include their ORCIDs as part of the submission process. If you don’t already have one you can create one here
You will be asked to provide contact details and academic affiliations for all co-authors via the submission system and identify who is to be the corresponding author. These details must match what appears on your manuscript. At this stage please ensure you have included all the required statements and declarations and uploaded any additional supplementary files (including reporting guidelines where relevant).
Provide full contact details for the corresponding author including email, mailing address and telephone numbers. Academic affiliations are required for all co-authors. These details should be presented separately to the main text of the article to facilitate anonymous peer review.
Please also ensure that you have obtained any necessary permission from copyright holders for reproducing any illustrations, tables, figures or lengthy quotations previously published elsewhere. For further information including guidance on fair dealing for criticism and review, please see the Copyright and Permissions page on the SAGE Author Gateway.
If your paper is accepted for publication after peer review, you will first be asked to complete the contributor’s publishing agreement. Once your manuscript files have been check for SAGE Production, your article will be prepared for publication and can appear online within an average of 25 days.
Your SAGE Production Editor will keep you informed as to your article’s progress throughout the production process. Proofs will be sent by PDF to the corresponding author and should be returned promptly. Authors are reminded to check their proofs carefully to confirm that all author information, including names, affiliations, sequence and contact details are correct, and that Funding and Conflict of Interest statements, if any, are accurate. Please note that if there are any changes to the author list at this stage all authors will be required to complete and sign a form authorising the change.
One of the many benefits of publishing your research in an open access journal is the speed to publication. With no page count constraints, your article will be published online in a fully citable form with a DOI number as soon as it has completed the production process. At this time it will be completely free to view and download for all.
Publication is not the end of the process! You can help disseminate your paper and ensure it is as widely read and cited as possible. The SAGE Author Gateway has numerous resources to help you promote your work. Visit the Promote Your Article page on the Gateway for tips and advice. In addition, SAGE is partnered with Kudos, a free service that allows authors to explain, enrich, share, and measure the impact of their article. Find out how to maximise your article’s impact with Kudos.
Any correspondence, queries or additional requests for information on the manuscript submission process should be sent to the Research & Politics editorial office as follows: